50 general purpose single & double pole eseries stainless steel springs thermoplastic actuating button phenolic case silver alloy, silver-cadmium oxide or gold crosspoint contacts common terminals nc terminal brass moving blades nc terminal no terminal no terminal features 5 current ratings choice of actuator styles 3 terminal types (optional screw terminals available consult factory) 3 contact arrangements long-life coil spring mechanism high-temperature 150 c and 200 c available on select models (consult factory) specifications electrical temperature rating: 105 c std. (150? and 200? optional ?e13, e14, e19, e20, g13) 85 c std. (e28 and e29) flammability rating: ul94hb materials case: general purpose phenolic actuating button: thermoplastic nylon common terminals: brass (e13, e19, e19a, g13, g20) silver-plated brass (e14, e20, e28, e29, e30) no and nc terminals: brass (e13, e19, e19a, g13, g20) copper (e14, e20, e28, e29, e30) moving blade: brass (e13, e19, e19a, g13, g20) silver-plated beryllium copper (e14, e20, e28, e29, e30) spring: stainless steel auxiliary actuators: cold-rolled steel (nickel-plated) roller: sintered stainless steel contacts: gold crosspoint (g13, g20, e19a) silver-cadmium oxide (e13, e14, e19, e20, e28) silver alloy (e19a, e29, e30) (e25 only) electrical ratings electrical life at rated load switch according to vde according to ul series en61058 rating ul1054 rating (min. operations) (min. operations) e13/e19 n/a 15a, 125/250vac; 3/4hp, 125vac n/a 6,000* 1-1/2hp, 250vac e19a n/a 15a, 125/250vac; 0.1a, 125vac n/a 6,000 (mixed ratings) e14/e25 n/a 25a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac e20 n/a 20a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac e28/e29 n/a 30.1a, 125/250/277vac n/a 6,000 (ul approved only ?resistive load only) e30 n/a 30.1a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac g13/g20 n/a 0.1a, 125vac n/a 6,000* *indicates 100k life available.
actuator specifications single pole maximum maximum operating minimum max. movement actuation operating pre-travel point* over-travel differential length** series/ actuator switch force inches inches inches inches inches prefix type type (g) (mm) (mm) (mm) (mm) (mm) e13/g13 00e 425 0.050 0.2850.020 0.100 0.015 (1.27) (7.240.51) (2.54) (0.38) e14/e29/e30 00a 850 0.100 0.2480.026 0.050 0.015 (2.54) (6.300.66) (1.27) (0.38) e13/g13 00j 425 0.050 0.6700.030 0.108 0.015 (1.27) (17.020.76) (2.74) (0.38) e14/e29/e30 850 0.100 0.6330.030 0.050 0.015 (2.54) (16.080.76) (1.27) (0.38) e13/g13 00m 425 0.050 0.8120.030 0.218 0.015 (1.27) (20.630.76) (5.54) (0.38) e14/e29/e30 850 0.100 0.7750.030 0.168 0.015 (2.54) (19.690.76) (4.27) (0.38) e13/g13 00h 100 0.250 0.3120.062 0.187 0.093 1.500 (6.35) (7.931.57) (4.75) (2.36) (38.10) e14/e29/e30 ? 285 0.312 0.4680.062 0.150 0.050 0.821 (7.93) (11.891.57) (3.81) (1.27) (20.85) e13/g13 50h 65 0.343 0.2810.062 0.187 0.140 1.750 (8.71) (7.141.57) (4.75) (3.56) (44.45) e14/e29/e30 ? 170 0.525 0.4370.062 0.218 0.080 1.071 (13.34) (11.101.57) (5.54) (2.03) (27.20) e13/g13 00k 100 0.250 0.7180.062 0.187 0.093 1.391 (6.35) (18.241.57) (4.75) (2.36) (35.33) e14/e29/e30 ? 285 0.348 0.8600.062 0.130 0.045 0.652 (8.84) (21.841.57) (3.30) (1.14) (16.56) e13/g13 50k 65 0.343 0.6870.062 0.187 0.140 1.645 (8.71) (17.451.57) (4.75) (3.56) (41.78) e14/e29/e30 ? 170 0.483 0.8280.062 0.218 0.073 0.902 (12.27) (21.031.57) (5.54) (1.85) (22.91) * measured above reference line. refer to dimensional drawing above. **actuator tolerance 0.031 inches (0.79mm). ? e14, e29 and e30 actuators are shorter and formed up 11 at the button. 0.500 (12.7) 0.41 (10.41) 0.41 (10.41) 0.33 (8.38) 0.300 (7.62) 0.130 (3.30) 30 0.250 (6.35) x 0.032 (0.813) q.c. or faston terminal 0.095 (2.41) dia. hole (3 places) 1.823 (46.30 0.015 0.38) + - + - 1.000 (25.4 0.007 0.18) + - + - 0.640 (16.26 0.015 0.38) + - + - reference line 0.195 (4.95) 0.306 (7.77 0.005 0.13) + - + - 0.640 (16.26 0.015 0.38) + - + - 0.364 (9.25 0.015 0.38) + - + - com n.o. n.c. 0.380 (9.65 0.015 0.38) + - + - 0.145 (3.68) diameter +0.005 -0.010 0.135 x 0.175 0.150 cavity for external auxiliary actuator +0.005 0.010 dimensions single pole inches (mm) actuation length 0.375 (9.53) diameter actuation length switch mounting hole high ratio standard ratio 0.375 (9.53) 0.375 (9.53) 0.250 (6.35) 0.250 (6.35) switch mounting hole high ratio standard ratio actuators single pole standard type integral hinged lever and roller actuators are available in choice of two mounting positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown. 0.406 (10.31) 0.312 (7.93) flat both sides 3/8 x 32 thread thermoplastic button - ooj suffix extra over-travel with internal spring-loaded metal button - oom suffix ??& ??type optional hardware single pole brass hex nut 0012-0023 brass knurled nut 0012-0025 brass hex nut 0012-0028 (nickel-pated) brass knurled nut 0012-0021 (nickel-pated) star washer 0012-0073 specifications subject to change without notice. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch you need. circuitry single pole contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. in general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. example: e13-00e is double throw, e13-01e is normally open, and e13-02e is normally closed. mounting single pole recommended mounting screw: #6-32 round head. recommended torque on screw: 6 inch lbs. max. terminals single pole standard 0.250 x 0.032 (6.35mm x 0.81mm) [optional 0.187 x 0.032 (4.75mm x 0.81mm)] qc terminals can be furnished with angle formed up or down. forms include straight 30 , 45 , 85 up or down. other forms can be provided. screw terminal ul approved on e14 and e30 only. 51
actuator specifications double pole maximum maximum operating minimum max. movement actuation operating pretravel point* overtravel differential length series/ actuator switch force inches inches inches inches inches prefix type type (g) (mm) (mm) (mm) (mm) (mm) e19/g20 00a 850 0.050 0.2850.030 0.080 0.015 (1.27) (7.240.76) (2.03) (0.38) e20/e28 1280 0.100 0.2480.030 0.050 0.015 (2.54) (6.300.76) (1.27) (0.38) e19/g20 -00j 850 0.050 0.6700.030 0.080 0.015 (1.27) (17.020.76) (2.03) (0.38) e20/e28 ? 1280 0.100 0.6300.030 0.050 0.015 (2.54) (16.000.76) (1.27) (0.38) e19/g20 00m 850 0.050 0.8120.030 0.218 0.015 (1.27) (20.620.76) (5.54) (.038) e20/e28 ? 1280 0.100 0.7740.030 0.188 0.015 (2.54) (19.660.76) (4.78) (0.38) e19/g20 00h 205 0.275 0.3120.062 0.187 0.093 1.500 (6.99) (7.921.57) (4.75) (2.36) (38.10) e20/e28 ? 425 0.330 0.4680.062 0.156 0.050 0.821 (8.38) (11.891.57) (3.96) (1.27) (20.85) e19/g20 50h 130 0.400 0.2810.062 0.187 0.140 1.750 (10.16) (7.141.57) (4.75) (3.56) (44.45) e20/e28 ? 285 0.600 0.4370.062 0.156 0.080 1.071 (15.24) (11.101.57) (3.96) (2.03) (27.20) e19/g20 00k 212 0.250 0.7180.062 0.187 0.093 1.391 (6.35) (18.241.57) (4.75) (2.36) (35.33) e20/e28 ? 425 0.348 0.8600.062 0.156 0.045 0.652 (8.84) (21.841.57) (3.96) (1.14) (16.56) e19/g20 50k 150 0.312 0.6870.062 0.187 0.140 1.645 (7.92) (17.451.57) (4.75) (3.56) (41.78) e20/e28 ? 312 0.525 0.8280.062 0.146 0.075 0.902 (13.34) (21.031.57) (3.71) (1.91) (22.91) * measured above reference line. refer to dimensional drawing above. **actuator tolerance .0.031 inches (0.79mm). ? e20 and e28 actuators are shorter and formed up 15 at the button. contact factory for e25 specifications. 0.500 (12.7) 0.330 (8.38) 30 (2 places) reference line cavity for aux. external actuator 0.095 (2.41) dia hole (6 places) 0.250 (6.35) x 0.032 (0.81) thk. quick connect terminal (6 places) 0.145 (3.68) 0.130 (3.30) 0.641 (16.28 0.015 0.38) + - + - 0.195 (4.95 0.015 0.38) + - + - 0.380 (9.65 0.015 0.38) + - + - 0.786 (19.96 0.015 0.38) + - + - 0.601 (15.27 0.015 0.38) + - + - 0.36 (9.14 0.015 0.38) + - + - 0.406 (10.31 0.015 0.38) + - + - 1.813 (46.05 0.015 0.38) + - + - 0.406 (10.31 0.015 0.38) + - + - 1.000 (25.4 0.007 0.18) + - + - 0.706 (17.93 0.015 0.38) + - + - 1.125 (28.58 0.015 0.38) + - + - 0.300 (7.62 0.015 0.38) + - + - n.c. n.o. n.c. n.o. com com +0.005 0.010 0.135 x 0.175 0.150 +0.005 0.010 note: with respect to operating sequence, pole 1 or 2 may operate first (virtually same time). if pole 1 or 2 must always operate in a particular sequence (1 before 2 or 2 before 1), consult factory. dimensions double pole inches (mm) actuation length 0.375 (9.53) diameter actuation length switch mounting hole high ratio standard ratio 0.375 (9.53) 0.375 (9.53) 0.250 (6.35) 0.250 (6.35) switch mounting hole high ratio standard ratio actuators double pole standard type integral hinged lever and roller actuators are available in choice of two mounting positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown. 0.406 (10.31) 0.312 (7.93) flat both sides 3/8 x 32 thread thermoplastic button - ooj suffix extra over-travel with internal spring-loaded metal button - oom suffix ??& ??type optional hardware double pole brass hex nut 0012-0023 brass knurled nut 0012-0025 brass hex nut 0012-0028 (nickel-plated) brass knurled nut 0012-0021 (nickel-pated) star washer 0012-0073 specifications subject to change without notice. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch you need. note: consult factory for part number when ordering e19a switches. mounting double pole recommended mounting screw: #6-32 round head. recommended torque on screw: 6 inch lbs. max. circuitry double pole contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. in general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. example: e19-00a is double throw, e19-01a is normally open, and e19-02a is normally closed. terminals double pole standard 0.250 x 0.032 (6.35mm x 0.81mm) [optional 0.187 x 0.032 (4.75mm x 0.81mm)] qc terminals can be furnished with angle formed up or down on common as well as open or closed terminal. forms include straight 30 , 45 , 85 up or down. other forms can be provided. 52
|
